To place an order, see the bottom of the home page.
Effective August 1st, 2016, Mini Truck & Tractor, LLC has purchased Standi Toys Inc.
If you are a retail dealer and need inventory, please contact us and we'll do our best to fill your needs as soon as possible.
All Standi Toy products are manufactured and assembled in the U.S.A.!!!!!!
If you are a retail dealer and need inventory, please contact us and we'll do our best to fill your needs as soon as possible.
All Standi Toy products are manufactured and assembled in the U.S.A.!!!!!!
Grain Equipment
Pictured in the front row, left to right; Model 30 Grain Bin, Model 21 Grain Bin.
Back row, left to right; Model 60 Grain Bin, Model 42 Grain Bin
See individual bins and prices below.
Back row, left to right; Model 60 Grain Bin, Model 42 Grain Bin
See individual bins and prices below.
Above picture is for size reference comparing the Standi bins to the Ertl bins. From Left to Right;
Model 21, small Ertl bin, Model 30, large Ertl bin, Model 42.
Model 21, small Ertl bin, Model 30, large Ertl bin, Model 42.
Model 21 Grain Bin. 5 1/4" Tall and 4" Diameter. Stock #ST10 Retail Price $12.00
Extra Rings for Model 21 Extra Ring is 1 7/8" Tall Stock #ST31 Retail Price $5.00
See below, The 52 ft auger will reach this bin.
Level full with the eave, this bin holds 6,107 bushels. Peaked full this bins hold 6966 bushels.
An extra ring would had approximately 3,000 bushels more.
Extra Rings for Model 21 Extra Ring is 1 7/8" Tall Stock #ST31 Retail Price $5.00
See below, The 52 ft auger will reach this bin.
Level full with the eave, this bin holds 6,107 bushels. Peaked full this bins hold 6966 bushels.
An extra ring would had approximately 3,000 bushels more.
Model 30 Grain Bin. 8 1/4" Tall, 5 5/8" Diameter Stock #ST11 Retail Price $14.00
Extra Rings for Model 30 Extra Ring is 3" Tall Stock #ST32 Retail Price $6.00
Only the 80 ft auger will reach this bin.
Level full with the eave, this bin holds 18,647 bushels. Peaked full this bins hold 21,194 bushels.
An extra ring would had approximately 9,000 bushels more.
Extra Rings for Model 30 Extra Ring is 3" Tall Stock #ST32 Retail Price $6.00
Only the 80 ft auger will reach this bin.
Level full with the eave, this bin holds 18,647 bushels. Peaked full this bins hold 21,194 bushels.
An extra ring would had approximately 9,000 bushels more.
Model 42 Grain Bin. 9" Tall, 8" Diameter. Stock #ST12 Retail Price $16.00
Extra Rings for Model 42 Extra Ring is 3" Tall Stock #ST33 Retail Price $6.00
Only the 80 ft auger will reach this bin.
Level full with the eave, this bin holds 36,549 bushels. Peaked full this bins hold 42,806 bushels.
An extra ring would had approximately 18,000 bushels more.
NOTE: If you get an extra ring that is warped or does not sit tightly against the adjoining ring you can fix it. Put it in an oven set at 170 degrees for about 5-8 minutes. Remove from oven and place on flat surface for about 10 minutes to cool. Or put it in a 16 qt stock pot of boiling water for 3 minutes. Then place directly into cold water.
Extra Rings for Model 42 Extra Ring is 3" Tall Stock #ST33 Retail Price $6.00
Only the 80 ft auger will reach this bin.
Level full with the eave, this bin holds 36,549 bushels. Peaked full this bins hold 42,806 bushels.
An extra ring would had approximately 18,000 bushels more.
NOTE: If you get an extra ring that is warped or does not sit tightly against the adjoining ring you can fix it. Put it in an oven set at 170 degrees for about 5-8 minutes. Remove from oven and place on flat surface for about 10 minutes to cool. Or put it in a 16 qt stock pot of boiling water for 3 minutes. Then place directly into cold water.
Model 60 Grain Bin. 15 1/4" Tall, 11 1/4" Diameter. Stock #ST13 Retail Price $60.00
Extra Rings are not available for the Model 60's. They are one piece construction.
Our grain augers will not reach this bin. Only the grain leg system, with extensions pieces will reach this bin. Our roof auger kit is needed to reach the Model 60 bin even with the longer auger produced by Midwest Farm Models.
Roof Auger kits are available farther down the page.
Level full with the eave, this bin holds 165,407 bushels. Peaked full this bins hold 194,182 bushels.
Extra Rings are not available for the Model 60's. They are one piece construction.
Our grain augers will not reach this bin. Only the grain leg system, with extensions pieces will reach this bin. Our roof auger kit is needed to reach the Model 60 bin even with the longer auger produced by Midwest Farm Models.
Roof Auger kits are available farther down the page.
Level full with the eave, this bin holds 165,407 bushels. Peaked full this bins hold 194,182 bushels.
Grain Bin Accessories
Leg support towers and catwalks
Styrene kit, Laser cut. Snaps together with instructions. Use Plastic Weld to finish gluing together.
9 Section grain leg tower kit. Modeled after a 14'x14' tower. Each
section is 10' tall. (Tower on right). Does not include top railing kit or
base. Sold separately below. Comes with instructions for assembly.
Height is 16 7/8" tall. 2 5/8" square. Use our grain leg with two extra sections, catwalk and conveyor (coming soon) to reach over the top of our Model 60 bins. Stk# MT6001 Retail Price $85.00
Leg Tower Base
Base for leg tower (notches cut for tabs on leg tower and holes drilled for
our grain leg)
Stock #MT 6005A Retail Price $4.00
Leg Tower Top Railing Kit (shown below with tower connection kit)
Comes with top gusset plate and railings.
Stk# MT6002 Retail Price $15.00
Catwalk Support Tower (shown on left). Matches up with the leg tower
to support out catwalks. Catwalks shown below. Tower is 1" square.
Stk# MT6004 Retail Price $80.00
Base for Catwalk Support Tower Stk# 6005B Retail Price $3.50
9 Section grain leg tower kit. Modeled after a 14'x14' tower. Each
section is 10' tall. (Tower on right). Does not include top railing kit or
base. Sold separately below. Comes with instructions for assembly.
Height is 16 7/8" tall. 2 5/8" square. Use our grain leg with two extra sections, catwalk and conveyor (coming soon) to reach over the top of our Model 60 bins. Stk# MT6001 Retail Price $85.00
Leg Tower Base
Base for leg tower (notches cut for tabs on leg tower and holes drilled for
our grain leg)
Stock #MT 6005A Retail Price $4.00
Leg Tower Top Railing Kit (shown below with tower connection kit)
Comes with top gusset plate and railings.
Stk# MT6002 Retail Price $15.00
Catwalk Support Tower (shown on left). Matches up with the leg tower
to support out catwalks. Catwalks shown below. Tower is 1" square.
Stk# MT6004 Retail Price $80.00
Base for Catwalk Support Tower Stk# 6005B Retail Price $3.50
Catwalk kits. Styrene kit, Laser cut. Snaps together with instructions. Use Plastic Weld to finish gluing together.
3 sizes shown on left. 23" top, 18" middle and 12" bottom.
They are 1" wide and in 1" increments with score line to trim to length. Connection pieces sold separately to help connect catwalks or make longer.
12" Stock# MT6006 Retail Price $28.00 (bottom in pic)
18" Stock# MT6007 Retail Price $39.00 (middle in pic)
23" Stock# MT6008 Retail Price $49.00 (top in pic)
3 sizes shown on left. 23" top, 18" middle and 12" bottom.
They are 1" wide and in 1" increments with score line to trim to length. Connection pieces sold separately to help connect catwalks or make longer.
12" Stock# MT6006 Retail Price $28.00 (bottom in pic)
18" Stock# MT6007 Retail Price $39.00 (middle in pic)
23" Stock# MT6008 Retail Price $49.00 (top in pic)
Catwalk connection kit for tower. Can be hung on top rail of tower or
lower. Splices into side of catwalk.
Stk#6005C Retail Price $5.00
lower. Splices into side of catwalk.
Stk#6005C Retail Price $5.00
Catwalk Splice Kit. Connection pieces for bottom panel of catwalk to splice
together, either straight or at 90 degree corners. Comes with two end caps
for catwalk.
Stk# MT 6003 Retail Price $10.00
together, either straight or at 90 degree corners. Comes with two end caps
for catwalk.
Stk# MT 6003 Retail Price $10.00
Bin Bases (painted for pictures) unpainted plexiglass, 1/8" thick. These are laser cut, with smooth edge.
Model 21's & 21 Hopper Stk# P4.5 Retail $5.00
Model 30 & Model 30 Hopper Stk# P6 Retail $6.00
Model 42 Stk# P8.25 Retail $7.00
The Model 60 is now cut from 1/4" thick material. This is 16" thick to scale and more correct looking.
Model 60 Stk# P11.75 Retail $12.00
Model 21's & 21 Hopper Stk# P4.5 Retail $5.00
Model 30 & Model 30 Hopper Stk# P6 Retail $6.00
Model 42 Stk# P8.25 Retail $7.00
The Model 60 is now cut from 1/4" thick material. This is 16" thick to scale and more correct looking.
Model 60 Stk# P11.75 Retail $12.00
Grain bin fan. Shown next to Model 21 bin for size reference.
Stk# P01 Retail Price $5.00 each.
Stk# P01 Retail Price $5.00 each.
Stock #K07 Bin ladder safety cage kit. This fits our model 42 bin as shown. Three pieces.
This is 3D printed for detailing your grain bins.
Retail Price $25.00 per kit.
This is 3D printed for detailing your grain bins.
Retail Price $25.00 per kit.
Stock #FF613 Package of 4 bin vents and unloading auger (unloading auger is Stk# P06 shown in photo below). Attach by drilling 3/32 hole. Retail Price $10.00
Extra vents are available for $2.00 each.
Package of 4 bin vents only $8.00 per set Stk# P13
Extra vents are available for $2.00 each.
Package of 4 bin vents only $8.00 per set Stk# P13
Unloading Auger. Attach by drilling 3/32 hole.
Stk # P06 Retail Price $4.00
Stk # P06 Retail Price $4.00
Vertical Unload Auger. Attach by drill 3/32 hole.
Stk# P07 Retail Price $8.00
Stk# P07 Retail Price $8.00
Roof Augers
Roof Augers are available for the Model 42 bin (shown above left) and Model 60 (shown above right). Other sizes are available upon request.
Stock #FF45 Roof Auger kit for Model 60
Stock #FF46 Roof Auger kit for Model 42
Stock #FF48 Roof Auger kit for Model 30
Retail price is $8.00 per kit.
Kit includes aluminum tube cut to length, a head and tail section. Auger must be assembled/glued together.
Our roof auger kit is needed to reach the Model 60 bin even with the longer auger produced by Midwest Farm Models.
Roof Augers are available for the Model 42 bin (shown above left) and Model 60 (shown above right). Other sizes are available upon request.
Stock #FF45 Roof Auger kit for Model 60
Stock #FF46 Roof Auger kit for Model 42
Stock #FF48 Roof Auger kit for Model 30
Retail price is $8.00 per kit.
Kit includes aluminum tube cut to length, a head and tail section. Auger must be assembled/glued together.
Our roof auger kit is needed to reach the Model 60 bin even with the longer auger produced by Midwest Farm Models.
Cross Auger kits are available for all our bins. (Model 42's shown in picture at left).
Model 42 Bin Kit Stk# FF47 Retail Price is $8.00
These are the same as the roof augers above except the head section has a 90 degree discharge instead of 45 degree.
Model 42 Bin Kit Stk# FF47 Retail Price is $8.00
These are the same as the roof augers above except the head section has a 90 degree discharge instead of 45 degree.
Leg Spout "dead head" pivot attachment. Use with a short piece of tube to attach
leg spout to bin (not included). Joint snaps together and swivels.
Stk# P63 Retail Price $4.00
leg spout to bin (not included). Joint snaps together and swivels.
Stk# P63 Retail Price $4.00
Double Run Conveyor Kit. Item show is assembled and painted. Comes as a kit only. Requires 3/16" tubing (.014 wall thickness).
Stock #K35 Retail Price $15.00
Stock #K35 Retail Price $15.00
Additional drops for double run kits.
Left is 90 degree end drop Stk #P138 Retail Price $3.00
Right is 90 degree intermediate drop Stk #P137 Retail Price $3.00
Left is 90 degree end drop Stk #P138 Retail Price $3.00
Right is 90 degree intermediate drop Stk #P137 Retail Price $3.00
Grain loop conveyor system. Comes with parts to make a loop to fill 2 bins. Use 3/16" OD .014 wall tubing to make it any way you like. These are 3D printed. Extra drops can be purchased to add additional bins. Real system pictured below. We will be adding more support tower components for these in the future.
Loop System Stk# K37 Retail Price $25.00
Extra Drops Stk# P89 Retail Price $4.00
Loop System Stk# K37 Retail Price $25.00
Extra Drops Stk# P89 Retail Price $4.00
Grain Conveyor Kits
All of these are 3D printed and dry fit over 1/4" square plastic tubing (supplied in the kit). You can buy the complete kit and add pieces that you need, or buy pieces individually to make whatever configuration you need.
K79 12" conveyor kit complete. Comes with one inlet and swivel joint for leg pipe and two bin discharges. Add more sections or discharges as you wish. The square "web" truss you see on the discharge spout going into our bins is to support itself under our catwalk kits. If you do not use the catwalk, simply trim it off.
Retail Price $35.00
K79 12" conveyor kit complete. Comes with one inlet and swivel joint for leg pipe and two bin discharges. Add more sections or discharges as you wish. The square "web" truss you see on the discharge spout going into our bins is to support itself under our catwalk kits. If you do not use the catwalk, simply trim it off.
Retail Price $35.00
K85 Drag Conveyor Head Section Kit. The square "web" truss you see on the discharge spout going into our bins is to support itself under our catwalk kits. If you do not use the catwalk, simply trim it off.
Retail Price $15.00
Retail Price $15.00
K86 Intermediate Section (adds 2" in length)
Retail Price $4.00
Retail Price $4.00
K86 Conveyor Inlet Section. Comes with swivel joint shown (add 2" in length).
Retail Price $5.00
Retail Price $5.00
K88 Discharge Section. Square "web" truss you see on the discharge spout which fits into our bins, is used to support itself under our catwalk kits. If you do not use the catwalk, simply trim it off.
Retail Price $6.00
Retail Price $6.00
K89 Conveyor Tail Section
Retail Price $5.00
Retail Price $5.00
K91 40 degree incline bend
Retail Price $4.00
Retail Price $4.00
Hopper Bins
Left; Model 30 Hopper Bin 11 1/4" tall Stock #ST21 Retail Price $16.00
This bin holds 26,940 bushels. An extra ring would had approximately 9000 bushels more.
Right; Model 21 Hopper Bin 7 3/4" tall Stock #ST20 Retail Price $12.00
This bin holds 8540 bushels. An extra ring would had approximately 3000 bushels more.
These hopper bins are like the Model 21 and Model 30 Grain Bin's and extra rings can be added.
This bin holds 26,940 bushels. An extra ring would had approximately 9000 bushels more.
Right; Model 21 Hopper Bin 7 3/4" tall Stock #ST20 Retail Price $12.00
This bin holds 8540 bushels. An extra ring would had approximately 3000 bushels more.
These hopper bins are like the Model 21 and Model 30 Grain Bin's and extra rings can be added.
Hopper Bin Superstructures. Left to right.
Model 21 Super Structure for Model 21Hopper Bin (Model 21 hopper bin sold separately). Total height is 11"
21 Hopper Superstructure is 3" tall, 4 3/8" square base.
Stock #ST28 Retail Price $10.00
Model 1500 Super Structure for 1500 Hopper Bins (1533 or 1534 hopper bin sold separately). Total height 7 3/4"
1500 Hopper Superstructure is 3" tall, 3 3/16" square base.
Stock #ST27 Retail Price $9.00
Model 1200 Super Structure for 1200 Hopper Bins (1233 or 1234 hopper bin sold separately).
Total height 7" 1200 Hopper Superstructure is 3" tall, with 2 3/8" square base.
Stock #ST26 Retail Price $9.00
Model 21 Super Structure for Model 21Hopper Bin (Model 21 hopper bin sold separately). Total height is 11"
21 Hopper Superstructure is 3" tall, 4 3/8" square base.
Stock #ST28 Retail Price $10.00
Model 1500 Super Structure for 1500 Hopper Bins (1533 or 1534 hopper bin sold separately). Total height 7 3/4"
1500 Hopper Superstructure is 3" tall, 3 3/16" square base.
Stock #ST27 Retail Price $9.00
Model 1200 Super Structure for 1200 Hopper Bins (1233 or 1234 hopper bin sold separately).
Total height 7" 1200 Hopper Superstructure is 3" tall, with 2 3/8" square base.
Stock #ST26 Retail Price $9.00
Left to right; 1534 Hopper Bin, 1533 Hopper Bin, 1234 Hopper Bin, 1233 Hopper Bin.
Retail Price $10.00 each
Extra Rings are listed below in next picture.
1233 Hopper Bin 2 1/8" Diameter, 3 3/4" Tall (Holds 1007 bu.) Stock #ST22
1234 Hopper Bin 2 1/8" Diameter, 4 1/4" Tall (Holds 1247 bu.) Stock #ST23
1533 Hopper Bin 3" Diameter, 4 1/4" Tall (Holds 1661 bu.) Stock #ST24
1534 Hopper Bin 3" Diameter, 4 3/4" Tall (Holds 2038 bu.) Stock #ST25
The 1200 bins are 12' diameter to scale and the 1500 bins are 15' diameter to scale.
Retail Price $10.00 each
Extra Rings are listed below in next picture.
1233 Hopper Bin 2 1/8" Diameter, 3 3/4" Tall (Holds 1007 bu.) Stock #ST22
1234 Hopper Bin 2 1/8" Diameter, 4 1/4" Tall (Holds 1247 bu.) Stock #ST23
1533 Hopper Bin 3" Diameter, 4 1/4" Tall (Holds 1661 bu.) Stock #ST24
1534 Hopper Bin 3" Diameter, 4 3/4" Tall (Holds 2038 bu.) Stock #ST25
The 1200 bins are 12' diameter to scale and the 1500 bins are 15' diameter to scale.
Small Hopper Bin Auger (shown on 1234 hopper bin - not included). Attaches by sliding on peg on
bottom of auger. 3D printed. Can be painted. Fits on any of the 1200 or 1500 series bins.
Discharge height of the spout is 2 3/8"
Stk #P91 Retail Price $10.00
bottom of auger. 3D printed. Can be painted. Fits on any of the 1200 or 1500 series bins.
Discharge height of the spout is 2 3/8"
Stk #P91 Retail Price $10.00
Extra Rings for 1200 & 1500 Hopper Bins Retail Price $5.00
1233 Ring Adds 1 1/2" in height Stock #ST34
1234 Ring Stock #ST35
1533 Ring Stock #ST36
1534 Ring Adds 2" in height Stock #ST37
1233 Ring Adds 1 1/2" in height Stock #ST34
1234 Ring Stock #ST35
1533 Ring Stock #ST36
1534 Ring Adds 2" in height Stock #ST37
Augers
32' Grain Auger (from left silver/red, yellow/red, green and red). Discharge height is 2 1/4". Auger is 5 3/4" long Retail Price $7.00
Red 32' Auger Stock #ST100
Green 32' Auger Stock #ST101
Red/Silver 32' Auger Stock #ST103
Red/Yellow 32' Auger Stock #ST105
Red/White 32' Auger Stock #ST106 (pictured below is now available)
Red 32' Auger Stock #ST100
Green 32' Auger Stock #ST101
Red/Silver 32' Auger Stock #ST103
Red/Yellow 32' Auger Stock #ST105
Red/White 32' Auger Stock #ST106 (pictured below is now available)
Model 21 Grain Bin (bin sold separately) with 52 ft auger. 52 ft augers are available in red, green, red/silver, red/yellow and green/silver. Maximum reach is 6 1/2" tall. Retail Price $8.00
Red 52' Auger Stock #ST110
Green 52' Auger Stock #ST111
Red/Silver 52' Auger Stock #ST113
Green/Silver 52' Auger Stock #ST114
Red/Yellow 52' Auger Stock #ST115
Red/White 52' Auger Stock #ST116 (Pictured below is now available)
Red 52' Auger Stock #ST110
Green 52' Auger Stock #ST111
Red/Silver 52' Auger Stock #ST113
Green/Silver 52' Auger Stock #ST114
Red/Yellow 52' Auger Stock #ST115
Red/White 52' Auger Stock #ST116 (Pictured below is now available)
Auger hopper. Can be used for our 52' augers also.
Stk# P52 Retail Price $4.00
Stk# P52 Retail Price $4.00
Model 42 Grain Bin (bin sold separately) with 80 ft auger. 80 ft augers are available in red, green, red/silver, red/yellow and green/silver. Maximum reach is 9 1/2" tall. Retail Price $9.00
Red 80' Auger Stock #ST120
Green 80' Auger Stock #ST121
Red/Silver 80' Auger Stock #ST123
Green/Silver 80' Auger Stock #ST124
Red/Yellow 80' Auger Stock #ST125
Red/White 80' Auger Stock #ST126
Red 80' Auger Stock #ST120
Green 80' Auger Stock #ST121
Red/Silver 80' Auger Stock #ST123
Green/Silver 80' Auger Stock #ST124
Red/Yellow 80' Auger Stock #ST125
Red/White 80' Auger Stock #ST126
Shown in the photo are bins of various sizes.
The grain leg system comes as shown with a base, 8 spouts and 8 bin caps. Spouts can be cut to length as needed.
The superstructure is a base and frame for the hopper bin for making a drive through. The base also serves as a base for the grain leg system.
Grain legs come in red, silver, green and orange. Retail Price $20.00
Overall height to top of leg is 17" Discharge height at distributor is 15"
Red Stock #ST130
Orange Stock #ST131
Green Stock #ST132
Silver Stock #ST133
Blue Stock #ST134
Grain Leg Extension pieces are available in all colors for $1.50 per section. Add approximately 2"
in height.
The grain leg system comes as shown with a base, 8 spouts and 8 bin caps. Spouts can be cut to length as needed.
The superstructure is a base and frame for the hopper bin for making a drive through. The base also serves as a base for the grain leg system.
Grain legs come in red, silver, green and orange. Retail Price $20.00
Overall height to top of leg is 17" Discharge height at distributor is 15"
Red Stock #ST130
Orange Stock #ST131
Green Stock #ST132
Silver Stock #ST133
Blue Stock #ST134
Grain Leg Extension pieces are available in all colors for $1.50 per section. Add approximately 2"
in height.
Shown is the grain leg (spouts are not pictured, but 8 are included with bin caps), 21 Hopper Bin and 21 Superstructure. All three items are sold separately. The grain leg comes with it's own base, but also will snap into tab on either side of any superstructure base.
Shown here #ST130 Red Grain Leg $20.00
#ST28 Model 21 Super Structure $10.00
#ST20 Model 21 Hopper Bin $11.00
Height to the top of the bin of 21 Hopper bin on Super Structure is 11"
Shown here #ST130 Red Grain Leg $20.00
#ST28 Model 21 Super Structure $10.00
#ST20 Model 21 Hopper Bin $11.00
Height to the top of the bin of 21 Hopper bin on Super Structure is 11"
Portable Wet Holding Bins. Retail Price $10.00
These are few available in silver, red, orange or green.
Red Stock # ST150 (previously #ST46)
Silver Stock #ST151 (previously #ST47 - shown with red wheels, but actual comes with silver wheels)
Green Stock #ST152
Orange Stock #ST153
3 1/2" Tall, 2" wide, 4 1/2" long.
These are few available in silver, red, orange or green.
Red Stock # ST150 (previously #ST46)
Silver Stock #ST151 (previously #ST47 - shown with red wheels, but actual comes with silver wheels)
Green Stock #ST152
Orange Stock #ST153
3 1/2" Tall, 2" wide, 4 1/2" long.
Grain Dryers
Portable Grain Dryers Retail Price $10.00
Red/Silver Stock #ST43
Green/Silver Stock #ST44
Orange/Silver Stock #ST45
2 3/8" tall, 1 5/8" wide, 3 3/4" long.
Single Grain Dryer (from left red, green and orange). Retail Price $14.00
This model is real life would be approximately 1000 bu/hr removing 5pt of moisture
Red Single Grain Dryer Stock #ST40
Green Single Grain Dryer Stock #ST41
Orange Single Grain Dryer Stock #ST42
Now Available (not pictured)
Yellow Single Grain Dryer Stock #ST48
We were responsible for building the prototype of the stackable dryer for Standi Toys. It has been and still is very popular item today. 3 3/16" tall, 1 3/4" wide 5 1/8" long.
This model is real life would be approximately 1000 bu/hr removing 5pt of moisture
Red Single Grain Dryer Stock #ST40
Green Single Grain Dryer Stock #ST41
Orange Single Grain Dryer Stock #ST42
Now Available (not pictured)
Yellow Single Grain Dryer Stock #ST48
We were responsible for building the prototype of the stackable dryer for Standi Toys. It has been and still is very popular item today. 3 3/16" tall, 1 3/4" wide 5 1/8" long.
Double Grain Dryers (from left red, green and orange). Retail Price $26.00
This model is real life would be approximately 2000 bu/hr removing 5pt of moisture
Red Double Grain Dryer Stock #ST50
Green Double Grain Dryer Stock #ST51
Orange Double Grain Dryer Stock #ST52
Now Available (not pictured)
Yellow Double Grain Dryer Stock #ST53
5 3/8" tall, 1 3/4" wide, 5 1/2" long.
This model is real life would be approximately 2000 bu/hr removing 5pt of moisture
Red Double Grain Dryer Stock #ST50
Green Double Grain Dryer Stock #ST51
Orange Double Grain Dryer Stock #ST52
Now Available (not pictured)
Yellow Double Grain Dryer Stock #ST53
5 3/8" tall, 1 3/4" wide, 5 1/2" long.
Triple Grain Dryer (from left red, green and orange). Retail Price $38.00
This model is real life would be approximately 3000 bu/hr removing 5pt of moisture
Red Triple Grain Dryer Stock #ST60
Green Triple Grain Dryer Stock #ST61
Orange Triple Grain Dryer Stock #ST62
Now Available (not pictured)
Yellow Triple Grain Dryer Stock #ST63
7 5/8" tall, 1 3/4" wide, 5 1/2" long.
This model is real life would be approximately 3000 bu/hr removing 5pt of moisture
Red Triple Grain Dryer Stock #ST60
Green Triple Grain Dryer Stock #ST61
Orange Triple Grain Dryer Stock #ST62
Now Available (not pictured)
Yellow Triple Grain Dryer Stock #ST63
7 5/8" tall, 1 3/4" wide, 5 1/2" long.
Dryer Fill and Unload Augers (shown above). These are 3D printed and have great detail.
Auger pictured on left is the dryer unload auger for reaching a grain leg. Stock #P53 Retail Price $8.00
Middle auger pictured is the Single Dryer Fill Auger. Comes with hopper pictured. Intake end has nicely detailed flighting and guard.
Stock #FF54 Retail Price $14.00
The Double and Triple Dryer auger kit (triple shown at right) looks similar to the single, but it's comes as a kit. It comes with brass tubing cut to length with an intake and head section as well as the black hopper pictured.
Stock #FF55 Double Dryer Fill Auger Kit Retail Price $14.00
Stock #FF56 Triple Dryer Fill Auger Kit Retail Price $14.00
Auger pictured on left is the dryer unload auger for reaching a grain leg. Stock #P53 Retail Price $8.00
Middle auger pictured is the Single Dryer Fill Auger. Comes with hopper pictured. Intake end has nicely detailed flighting and guard.
Stock #FF54 Retail Price $14.00
The Double and Triple Dryer auger kit (triple shown at right) looks similar to the single, but it's comes as a kit. It comes with brass tubing cut to length with an intake and head section as well as the black hopper pictured.
Stock #FF55 Double Dryer Fill Auger Kit Retail Price $14.00
Stock #FF56 Triple Dryer Fill Auger Kit Retail Price $14.00
Hay & Forage Equipment
Left to right, Hay head and spout for 7000 Chopper and Hay head and spout for 6900 Chopper. Heads attach just like the factory one does. Spout requires popping off original and pushing new one in existing hole. No modification required. New spout reaches much taller wagon or trucks. Raises, lowers and rotates 180 degrees. CHOPPER IS NOT INCLUDED.
Retail Price is $10.00 each.
6900 Head & Spout Stock #ST350 7500 Head & Spout Stock #ST351
Retail Price is $10.00 each.
6900 Head & Spout Stock #ST350 7500 Head & Spout Stock #ST351
Hay head for 8000 chopper. Stock #ST349 Retail Price $10.00
CHOPPER IS NOT INCLUDED.
CHOPPER IS NOT INCLUDED.
Adapter for putting 12 row Standi corn head or 6910 series hay pickup head on Green 8000 chopper or Claas Chopper pictured below. Fits both. (Gray piece in pictures below). CHOPPER AND HEADS NOT INCLUDED. This is a 3D printed item, intended for ages 10 and up.
Stock #P151 Retail Price $4.00
For NH FR850 (not pictured) CHOPPER AND HEADS NOT INCLUDED. This is a 3D printed item, intended for ages 10 and up.
Stock #P152 Retail Price $4.00
Stock #P151 Retail Price $4.00
For NH FR850 (not pictured) CHOPPER AND HEADS NOT INCLUDED. This is a 3D printed item, intended for ages 10 and up.
Stock #P152 Retail Price $4.00
Hay head and taller spout for pull type choppers. Available in red, green, black, white and yellow. Chopper NOT included. Retail Price $9.00
The red pull type chopper needs to have a notch cut in the brace on the hitch to hook up this head.
Yellow Head & Spout Stock #ST352
Red Head & Spout Stock #ST353
White Head & Spout Stock #ST354
Black Head & Spout Stock #ST355
Green Head & Spout Stock #ST356
The red pull type chopper needs to have a notch cut in the brace on the hitch to hook up this head.
Yellow Head & Spout Stock #ST352
Red Head & Spout Stock #ST353
White Head & Spout Stock #ST354
Black Head & Spout Stock #ST355
Green Head & Spout Stock #ST356
Forage Wagons - See picture below stock numbers.
Single Axle Wagons Retail Price $9.00
Tandem Axle Wagons Retail Price $11.00
Red/White Top Single Axle Stock #ST160 Green/Yellow Top Single Axle Stock #ST166
Red/Silver Top Single Axle Stock #ST161 Green/Silver Top Single Axle Stock #ST167
Red/Yellow Top Single Axle Stock #ST162 Green/Yellow Top Tandem Axle Stock #ST168
Red/White Top Tandem Axle Stock #ST163 Green/Silver Top Tandem Axle Stock #ST169
Red/Silver Top Tandem Axle Stock #ST164
Red/Yellow Top Tandem Axle Stock #ST165
Single Axle Wagons Retail Price $9.00
Tandem Axle Wagons Retail Price $11.00
Red/White Top Single Axle Stock #ST160 Green/Yellow Top Single Axle Stock #ST166
Red/Silver Top Single Axle Stock #ST161 Green/Silver Top Single Axle Stock #ST167
Red/Yellow Top Single Axle Stock #ST162 Green/Yellow Top Tandem Axle Stock #ST168
Red/White Top Tandem Axle Stock #ST163 Green/Silver Top Tandem Axle Stock #ST169
Red/Silver Top Tandem Axle Stock #ST164
Red/Yellow Top Tandem Axle Stock #ST165
|
|
Silage Box Truck Kit with Box, Gate, Hoist and Frame Retail Price $16.00
Silage box is 1 3/8" wide, 1 5/8" tall and 3 3/4" long.
Frame, Hoist and Red Truck Box with Gate Stock #ST421
Frame, Hoist and Black Truck Box with Gate Stock #ST422
Frame, Hoist and White Truck Box with Gate Stock #ST423
Frame, Hoist and Silver Truck Box with Gate Stock #ST424
Silage box is 1 3/8" wide, 1 5/8" tall and 3 3/4" long.
Frame, Hoist and Red Truck Box with Gate Stock #ST421
Frame, Hoist and Black Truck Box with Gate Stock #ST422
Frame, Hoist and White Truck Box with Gate Stock #ST423
Frame, Hoist and Silver Truck Box with Gate Stock #ST424
Bunker Silos are available in 3 versions.
The one cell (shown above left) approximately 12" x 12". Retail Price $45.00 Stock #ST390
Two cell (shown above middle) approximately 18" wide x12" Retail Price $55.00 Stock #ST391
Three cell (shown above right) approximately 24" wide x 12" Retail Price $70.00 Stock #ST392
The one cell (shown above left) approximately 12" x 12". Retail Price $45.00 Stock #ST390
Two cell (shown above middle) approximately 18" wide x12" Retail Price $55.00 Stock #ST391
Three cell (shown above right) approximately 24" wide x 12" Retail Price $70.00 Stock #ST392
Silo blowers Retail Price $5.00
Use on cement stave silos or blue harvestore silos.
Red Stock #ST310
Green Stock #ST311
Use on cement stave silos or blue harvestore silos.
Red Stock #ST310
Green Stock #ST311
Left; Silver top Concrete Silo, Right; White top Concrete Silo. 20 x 60 Retail Price $16.00
White Stock #ST320
Silver Stock #ST321
Checkerboard decals are available for the stave silos. $2.00 each.
Blowers (not shown) are available in red or green for $5.00 each.
Red Blower Stock #ST310
Green Blower Stock #ST311
White Stock #ST320
Silver Stock #ST321
Checkerboard decals are available for the stave silos. $2.00 each.
Blowers (not shown) are available in red or green for $5.00 each.
Red Blower Stock #ST310
Green Blower Stock #ST311
Checkerboard decal for stave silo. $2/set
Available in Black/White or Gray/White
Available in Black/White or Gray/White
Blue silos are available in 20x40 (2nd from left), 20x60 shown (center), 20x80 (2nd from right) and 20x100 (right). White roof is standard. Blue roof are available, as shown in a 20x60 on left.
Retail Prices are (White roof listed)
20x40 Stock #ST300 4 3/16" outside diameter, 8 11/16" tall $16.00
20x60 Stock #ST302 4 3/16" outside diameter, 12 1/2" tall $24.00
20x80 Stock #ST304 4 3/16" outside diameter, 16 5/16" tall $32.00
20x100 Stock #ST306 4 3/16" outside diameter, 20 1/8" tall $40.00
Blue roof stock numbers are 20x40 #ST301, 20x60 #ST303, 20x80 #ST305, 20x100 #ST307
Retail Prices are (White roof listed)
20x40 Stock #ST300 4 3/16" outside diameter, 8 11/16" tall $16.00
20x60 Stock #ST302 4 3/16" outside diameter, 12 1/2" tall $24.00
20x80 Stock #ST304 4 3/16" outside diameter, 16 5/16" tall $32.00
20x100 Stock #ST306 4 3/16" outside diameter, 20 1/8" tall $40.00
Blue roof stock numbers are 20x40 #ST301, 20x60 #ST303, 20x80 #ST305, 20x100 #ST307
American Flag with AO Smith Harvestore System logo decals are available for the blue
silos. $2.00 each
silos. $2.00 each
32' Feeder Wagon, available in red or green. Retail Price $10.00
Red Stock # ST376
Green Stock #ST377
7 3/8" long, 1 3/4" wide, 15/16" tall.
Red Stock # ST376
Green Stock #ST377
7 3/8" long, 1 3/4" wide, 15/16" tall.
Single (right) and Tandem (left) Axle Bale Wagons. Includes rear hitch.
Red or Green in both versions.
Red Single Axle Stock #ST225 Retail $8.00
Green Single Axle Stock #ST227
Red Tandem Axle Stock #ST232 Retail $10.00
Green Tandem Axle Stock #ST234
Red or Green in both versions.
Red Single Axle Stock #ST225 Retail $8.00
Green Single Axle Stock #ST227
Red Tandem Axle Stock #ST232 Retail $10.00
Green Tandem Axle Stock #ST234
Hay Stacker Available in red or green. Retail Price $7.00
Hesston colors Stock #ST356
Red Stock #ST357
Green Stock #ST358
3 1/2" long, 1 3/4" wide, and 2" tall.
Hesston colors Stock #ST356
Red Stock #ST357
Green Stock #ST358
3 1/2" long, 1 3/4" wide, and 2" tall.
TMR Mixer Wagon available in red or green. Retail Price $15.00
Red Stock #ST373
Green Stock #ST374
3 3/4" long, 1 9/16" wide, 1 1/2" tall.
Red Stock #ST373
Green Stock #ST374
3 3/4" long, 1 9/16" wide, 1 1/2" tall.
Round Bale Feeders 1-3/8" inside diameter, 3/4" tall Retail Price $8.00
Green (bottom left) #ST394GR
Red (bottom right) #ST394R
Gold (top left) #ST394GR
Black (top center) #ST394B
Silver (top right) #ST394S
(These are all metal construction and very durable. These are not a Standi Toy product).
Green (bottom left) #ST394GR
Red (bottom right) #ST394R
Gold (top left) #ST394GR
Black (top center) #ST394B
Silver (top right) #ST394S
(These are all metal construction and very durable. These are not a Standi Toy product).
Our bale inside the round bale feeder
Round Bales, package of 6. Retail Price $5.00
Bales are 7/8" wide and 1" tall (diameter)
Hay #ST334
Straw #ST335
Bales are 7/8" wide and 1" tall (diameter)
Hay #ST334
Straw #ST335
Round Bale Transport with 6 Round Bales Retail Price $10.00
Red with Hay Bales Stock #ST342
Red with Straw Bales Stock #ST343
Green with Hay Bales Stock #ST344
Green with Straw Bales Stock #ST345
In the bottom right of the picture are bale forks for tractor hitch (left) and loader (right). $1.00/set
Red Stock #ST346 Green Stock #ST347
Red with Hay Bales Stock #ST342
Red with Straw Bales Stock #ST343
Green with Hay Bales Stock #ST344
Green with Straw Bales Stock #ST345
In the bottom right of the picture are bale forks for tractor hitch (left) and loader (right). $1.00/set
Red Stock #ST346 Green Stock #ST347
Hay or Straw Large Square Bales. Come in package of 6, all sizes Retail Price $5.00
4'x4' hay #ST338
4'x4' straw (shown on right) #ST341 4 x 4 Actual size 3/4"x3/4"x1 1/2"
3'x3' hay (in center) #ST337
3'x3' straw #ST340 3 x 3 Actual size 1/2" x 1/2" x 1 1/2"
2'x3" hay #ST336
2'x3' straw (shown on left) #ST339 2 x 3 Actual size 5/16" x 1/2" x 1 1/2"
4'x4' hay #ST338
4'x4' straw (shown on right) #ST341 4 x 4 Actual size 3/4"x3/4"x1 1/2"
3'x3' hay (in center) #ST337
3'x3' straw #ST340 3 x 3 Actual size 1/2" x 1/2" x 1 1/2"
2'x3" hay #ST336
2'x3' straw (shown on left) #ST339 2 x 3 Actual size 5/16" x 1/2" x 1 1/2"
Small Square Bales in Hay or Straw available in 50 or 100 packs. 50 Pack $5.00
Bales are 1/2" long, 1/4" wide, 1/4" tall. 100 Pack $10.00
Small bales are small and recommended for ages 5 and up.
Bales are 1/2" long, 1/4" wide, 1/4" tall. 100 Pack $10.00
Small bales are small and recommended for ages 5 and up.
Animals
Cows Bag of 20 cows and 5 calves $9.00 Pigs Bag of 25 $4.00
Stk #12660 Hereford (above left in left pic) #12663 Black & White (above left in right pic)
Stk #12661 Angus (above right in left pic) #12664 Brown (above right in right pic)
Stk $12662 Holstein (not pictured) #12820 Pink (not pictured)
Stk #12660 Hereford (above left in left pic) #12663 Black & White (above left in right pic)
Stk #12661 Angus (above right in left pic) #12664 Brown (above right in right pic)
Stk $12662 Holstein (not pictured) #12820 Pink (not pictured)
Barns
NEW!!! Smaller sized free stall barn coming summer 2024. We replaced the large 40" long barn with a smaller (approximately 22" square barn) that holds 138 cows.
Small Free stall Dairy Barn holds 138 cows. Includes 4 - 21 cow stanchions, 2 - 27 cow stanchions and 10 gates. Roof is removable. These are built out of steel and are very durable. Does NOT include cows. This barn is approximately 22" long by 20" wide.
Retail Price is $300.00 Stock #ST396
These are made of steel and have a powder coated finish, comes in the color shown. Very durable.
Small Free stall Dairy Barn holds 138 cows. Includes 4 - 21 cow stanchions, 2 - 27 cow stanchions and 10 gates. Roof is removable. These are built out of steel and are very durable. Does NOT include cows. This barn is approximately 22" long by 20" wide.
Retail Price is $300.00 Stock #ST396
These are made of steel and have a powder coated finish, comes in the color shown. Very durable.
Left picture shows half of the barn with all the stanchions on the right. Left half only has stanchions shown on outside wall. Two sets of 21 cow are in the center(missing). Right hand pictures shows 1/4 of the barn with all stanchions in place. 27 cow along outside wall and two 21 cow in center.
Monoslope Cattle Barn
Above is our new monoslope cattle barn. These are available in all white, or red with a white roof (as of now the red barn will be red inside and out including the floor. Prototype in pictures is custom painted). Roof is removable.
This barn to scale is 60'x144'. Actual dimension is 11 3/4" x 27 1/4"
Barn will have a full length feed bunk in the front. It has 3 bays and your choice of color of gates are included; red, orange, green, silver, yellow or blue.
These are very heavy and durable. Made of 16 gauge steel. Powder coated finish.
ST387R - Red with White Roof Retail Price $165.00
ST387W - All White
This barn to scale is 60'x144'. Actual dimension is 11 3/4" x 27 1/4"
Barn will have a full length feed bunk in the front. It has 3 bays and your choice of color of gates are included; red, orange, green, silver, yellow or blue.
These are very heavy and durable. Made of 16 gauge steel. Powder coated finish.
ST387R - Red with White Roof Retail Price $165.00
ST387W - All White
Quonset
Quonset Shed has sliding doors on one end. 15" long, 7 7/8" wide. Door opening is 2 5/8" tall by 3 3/4" wide.
Stock #ST388 Retail Price $50.00
Stock #ST388 Retail Price $50.00
ST395 Hoop Shed.
Actual dimensions are 10 3/4" wide, 11 1/2" deep and 5 1/2" tall.
Prototype show, real model will vary slight - base pictured is bare unpainted steel.
Retail Price $60.00
Actual dimensions are 10 3/4" wide, 11 1/2" deep and 5 1/2" tall.
Prototype show, real model will vary slight - base pictured is bare unpainted steel.
Retail Price $60.00
Livestock Handling Equipment
Left; H bunk, Right; J Bunk. Both are made of aluminum, 12" in length. Retail Price $3.00
J Bunk Stock #ST380
H Bunk Stock #ST381
J Bunk Stock #ST380
H Bunk Stock #ST381
Left, Pig Hut Stock #ST385 Retail Price $3.00 each
Right; Calf Hut Stock #ST384
Right; Calf Hut Stock #ST384
|
Gate colors are from top left, counter clockwise; Silver, Yellow, Orange, Blue, Green and Orange.
|
|
Gates, left to right, top two rows; 16' Cattle, 10' Cattle,
Second from Bottom; 10' Hog, Bottom Row; 16' Hog. Gates are 3 for $2.00 16' gates are 3" wide, 10' gates are 1 7/8" wide |
Fence. 6 pieces/pack. Retail Price $4.00 Approximate length is 3 feet per package.
White Stock #STWFP6
Brown Stock #STBFP6
Retail Price $6.00/pkg
Each piece is 6" long and 3/4" tall.
White Stock #STWFP6
Brown Stock #STBFP6
Retail Price $6.00/pkg
Each piece is 6" long and 3/4" tall.
Stanchions
21 cow; bottom right. 15 5/8" long 3/4" tall, 1 1/2" wide. Stock #ST382 Retail Price $24.00
27 cow; top left. 20 1/4" long 3/4" tall, 1 1/2" wide. Stock #ST383 Retail Price $30.00
21 cow; bottom right. 15 5/8" long 3/4" tall, 1 1/2" wide. Stock #ST382 Retail Price $24.00
27 cow; top left. 20 1/4" long 3/4" tall, 1 1/2" wide. Stock #ST383 Retail Price $30.00
12 cow stanchion 9 1/4" long, 3/4' tall, 1 1/4" wide Stock# ST379 Retail Price $16.00
Manure Spreader Retail price $10.00
Stock #ST361 Red
Stock #ST362 Green
Stock #ST361 Red
Stock #ST362 Green
Harvest Equipment
Stalk Chopper (six row) shown in green, also available in red. Retail Price $8.00
Red Stock #ST370
Green Stock #ST371
Red Stock #ST370
Green Stock #ST371
3 Row Corn Picker Retail Price $9.00
Red Stock #ST215
Green Stock #ST216
New Idea Stock #ST217
Red Stock #ST215
Green Stock #ST216
New Idea Stock #ST217
Flare Box Wagon for corn pickers
Feature a rear hitch to hook together and two position hoist with raiseable box.
Retail Price $8.00
Red Stock #ST220
Red/Silver Stock #ST219
Red/White Stock #ST222
Green Stock #221
Green/Silver Stock #ST223
Green/Yellow Stock #ST224
Feature a rear hitch to hook together and two position hoist with raiseable box.
Retail Price $8.00
Red Stock #ST220
Red/Silver Stock #ST219
Red/White Stock #ST222
Green Stock #221
Green/Silver Stock #ST223
Green/Yellow Stock #ST224
Corn Crib 5 1/2" tall, 3 5/16" diameter. #ST200 Retail Price $9.00
Extra Rings Adds 1 1/4" in height #ST201 Retail Price $5.00
Extra Rings Adds 1 1/4" in height #ST201 Retail Price $5.00
Elevator shown in red, also available in green, red/silver, green/silver and silver. Retail Price $8.00
Maximum reach is 7 1/8" tall.
Red Elevator Stock #ST202
Green Elevator Stock #ST203
Silver Elevator Stock #ST204
Red/Silver Elevator Stock #ST212
Green/Silver Elevator Stock #ST213
Maximum reach is 7 1/8" tall.
Red Elevator Stock #ST202
Green Elevator Stock #ST203
Silver Elevator Stock #ST204
Red/Silver Elevator Stock #ST212
Green/Silver Elevator Stock #ST213
Header Trailer available in black, red, green or yellow. Retail Price $8.00
This will work for 12 row head. Overall length is 6", 1 1/2" tall
Black Stock #ST205
Red Stock #ST206
Green Stock #ST207
Yellow Stock #ST208
This will work for 12 row head. Overall length is 6", 1 1/2" tall
Black Stock #ST205
Red Stock #ST206
Green Stock #ST207
Yellow Stock #ST208
30 Foot Grain Head shown in green, also available in red, silver and yellow.
Retail Price $10.00
Red Stock #ST240
Green Stock #ST241
Silver for C Series Stock #ST242 (We have R series available-please request)
This fit the JD 9000, JD CTS and CIH 2X88 series feeder houses.
Retail Price $10.00
Red Stock #ST240
Green Stock #ST241
Silver for C Series Stock #ST242 (We have R series available-please request)
This fit the JD 9000, JD CTS and CIH 2X88 series feeder houses.
12 Row Corn Head shown in red, also available in green, silver and yellow.
Retail Price $7.00
Red Stock #ST245
Green Stock #ST246
Silver for R50/52 Stock #ST247 (or C Series-please specify)
This fit the JD 9000, JD CTS and CIH 2X88 series feeder houses.
Retail Price $7.00
Red Stock #ST245
Green Stock #ST246
Silver for R50/52 Stock #ST247 (or C Series-please specify)
This fit the JD 9000, JD CTS and CIH 2X88 series feeder houses.
Combine Bin Extension. Retail Price $6.00
Black for CIH 2000 Stock #ST250
Red for CIH 2000 Stock #ST251
Green fits JD 9000 Series Stock #ST252
Silver for C62 Gleaner and MF Stock #ST253
Black for CIH 2000 Stock #ST250
Red for CIH 2000 Stock #ST251
Green fits JD 9000 Series Stock #ST252
Silver for C62 Gleaner and MF Stock #ST253
Combine unload augers. Retail Price $3.00
Red Stock #ST255
Green Stock #ST256
Silver Stock #ST257
Yellow Stock #ST258
These are not exact matches to Ertl replacements and are longer than the stock augers that came on the JD9000, CIH2300, etc. See picture below. Standi made these when they began producing the 30 ft bean heads and 12 row corn heads as the stock Ertl augers were too short.
Red Stock #ST255
Green Stock #ST256
Silver Stock #ST257
Yellow Stock #ST258
These are not exact matches to Ertl replacements and are longer than the stock augers that came on the JD9000, CIH2300, etc. See picture below. Standi made these when they began producing the 30 ft bean heads and 12 row corn heads as the stock Ertl augers were too short.
Overall length approximately 3 3/4" long
Grain Drills
Grain Drill Retail Price $8.00
Red (white lid) Stock #ST260
Red (red lid) Stock #ST264
Green Stock #ST261
Orange Stock #ST262 (see below)
Orange with white lid Stock #262W (see below)
Green with tan lid Stock #ST263
Red (white lid) Stock #ST260
Red (red lid) Stock #ST264
Green Stock #ST261
Orange Stock #ST262 (see below)
Orange with white lid Stock #262W (see below)
Green with tan lid Stock #ST263
Orange #262 on left, Orange with white lid #262W on right.
No-Till Drill Retail Price $12.00
Red Stock #ST266
Green Stock #ST267
Red with Black Cart Stock #ST268
Green with Black Cart Stock #ST269
Green/tan lid w/Black Cart Stock #ST270
Orange with Black Cart Stock #ST271 (see below)
Orange with Green Cart Stock #ST273 (see below)
Red Stock #ST266
Green Stock #ST267
Red with Black Cart Stock #ST268
Green with Black Cart Stock #ST269
Green/tan lid w/Black Cart Stock #ST270
Orange with Black Cart Stock #ST271 (see below)
Orange with Green Cart Stock #ST273 (see below)
Orange with black cart (ST271) on left, Orange with green cart (ST273) on right.
Triple Hitch - pull three grain drills or three hay rakes. Fold back and pulls in line for transport. Come with row markers (not pictured). Retail Price $$5.00
Stock #ST481 Red (Note-stock number change 2-19-21)
Stock #ST482 Green (Note-stock number change 2-19-21)
Stock #ST483 Black (Note-stock number change 2-19-21)
Stock #ST481 Red (Note-stock number change 2-19-21)
Stock #ST482 Green (Note-stock number change 2-19-21)
Stock #ST483 Black (Note-stock number change 2-19-21)
Miscellaneous Equipment
Hinge Kits for folding mulch tiller or field cultivators. $5/set of 4
Stock #ST451 Black
Stock #ST452 Red
Stock #ST453 Green
Stock #ST454 Versatile Yellow
Stock #ST455 Blue
Stock #ST456 Steiger Green
Stock #ST451 Black
Stock #ST452 Red
Stock #ST453 Green
Stock #ST454 Versatile Yellow
Stock #ST455 Blue
Stock #ST456 Steiger Green
V8 Engine Kit - Drill two holes and glue over existing engine to make V8 engine in tractor with exhaust pipes. Retail Price $5.00 set
Stock #ST470 Red
Stock #ST471 Green
Stock #ST472 Chrome
Stock #ST470 Red
Stock #ST471 Green
Stock #ST472 Chrome
Milk Trucks & Kits
Triple Axle Milk Truck Kit (pictured). Includes tank, frame and fenders. This is a kit only. Truck cab and frame NOT included.
#ST417 Triple Axle Kit Retail Price $25.00
Finished tank length is 3 1/2". 1 tag axle and 2 solid axles.
Not pictured #ST418 Quad Axle Kit. Retail Price $30.00
Finished tank length is 4 7/16" 1 tag axle, 2 solid, 1 tag axle.
#ST419 Six Axle Kit. Retail Price $35.00
Finished tank length is 5 3/8" long. 2 tag axles, 2 solid, 2 tag axles.
See some of our customers custom milk trucks below. These were built by customers with out kits.
#ST417 Triple Axle Kit Retail Price $25.00
Finished tank length is 3 1/2". 1 tag axle and 2 solid axles.
Not pictured #ST418 Quad Axle Kit. Retail Price $30.00
Finished tank length is 4 7/16" 1 tag axle, 2 solid, 1 tag axle.
#ST419 Six Axle Kit. Retail Price $35.00
Finished tank length is 5 3/8" long. 2 tag axles, 2 solid, 2 tag axles.
See some of our customers custom milk trucks below. These were built by customers with out kits.
Milk Semi Trailers
Tandem axle milk tanker. #ST414 Truck not included. Retail Price $45.00
This frame has been retooled so it sits level when hooked to DCP truck.
Will have DCP 10 hole chrome wheels. Available with and without out ladder
This frame has been retooled so it sits level when hooked to DCP truck.
Will have DCP 10 hole chrome wheels. Available with and without out ladder
Triple axle milk tanker. #ST415 Truck not included. Retail Price $48.00
This frame has been retooled so it sits level when hooked to DCP truck.
Will have DCP 10 hole chrome wheels. Available with and without ladder.
This frame has been retooled so it sits level when hooked to DCP truck.
Will have DCP 10 hole chrome wheels. Available with and without ladder.
Gooseneck Trailers
24' Tandem Axle Gooseneck Trailer (truck no included). Stock #ST410 Retail Price $18.00
6 1/4" long, 1 5/8" wide. Bed length is 4 3/8"
6 1/4" long, 1 5/8" wide. Bed length is 4 3/8"
28' Tri Axle Gooseneck Trailer. Stock #ST411 Retail Price $20.00
7" long, 1 5/8" wide. Bed length is 5 1/8"
7" long, 1 5/8" wide. Bed length is 5 1/8"
32' Gooseneck Cattle Trailers.
Tandem Axle Stock# ST412 Retail Price $46.00
Triple Axle Stock# ST413 Retail Price $48.00
Cattle trailers have working roll up door on rear.
Trailers are 6" long, 1 5/8" wide, 1 3/4" tall
Tandem Axle Stock# ST412 Retail Price $46.00
Triple Axle Stock# ST413 Retail Price $48.00
Cattle trailers have working roll up door on rear.
Trailers are 6" long, 1 5/8" wide, 1 3/4" tall
Cattle Pots
As we are getting through more of the Standi inventory we have found some of the older cattle pots. We will be offering the old inventory for sale as we find it. Not sure if we will produce these when they are gone.
The following models were produced
Wilson - Tandem, Triple, Quad, Spread, Spread Axle Hog Flat Floor, and Tandem Axle Hog Flat Floor.
Merritt - Tandem, Triple.
Wilson tandem axle, Wilson spread axle and Merritt tandem axle are sold out. We will not be reproducing them at this time as the cost is too much to justify making more.
The following models were produced
Wilson - Tandem, Triple, Quad, Spread, Spread Axle Hog Flat Floor, and Tandem Axle Hog Flat Floor.
Merritt - Tandem, Triple.
Wilson tandem axle, Wilson spread axle and Merritt tandem axle are sold out. We will not be reproducing them at this time as the cost is too much to justify making more.
Merritt Triple Axle Stock# ST508
Retail Price $35.00
Retail Price $35.00
Wilson Tandem Axle Hog Flat Floor Stock #ST505
Retail Price $35.00
Retail Price $35.00
Wilson Triple Axle Stock # ST502
Retail Price $35.00
Retail Price $35.00
Wilson Quad Axle Stock #ST503
Retail Price $35.00
Retail Price $35.00